SKU: ARMOREPOXY100 | Barcode: 00850052432775

Armor Epoxy 100

$279.99

Shipping calculated at checkout.

Color: Clear

Clear Armor Epoxy 100 coating from Epoxy Floor Flakes, showcasing a smooth, glossy epoxy floor finish with a protective layer.

Clear Armor Epoxy 100 coating on a floor, showcasing a smooth, glossy finish ideal for durable epoxy floor applications.

Clear Armor Epoxy 100 coating from Epoxy Floor Flakes applied on a floor surface with a glossy finish.

Clear Armor Epoxy 100 coating applied on a floor, showcasing a durable epoxy floor flakes finish with a smooth, glossy surface.

Clear Armor Epoxy 100 coating from Epoxy Floor Flakes, shown in a close-up of the smooth, glossy epoxy surface.

Product variants

SHIPS FREE* same-day when order is placed before 3 PM EST M-F. Orders placed after 3 PM, on a weekend, or on a holiday will ship the following business day. *For shipping to Hawaii, Alaska, or outside of the US please reach out for a shipping quote.

Returns

Returns are accepted on unopened and unused product within
30 days from the date the product was received. If you need to make a return,
please contact us for a pre-paid return label. We can be reached at
866-306-0246, or via email at returns@foundationarmor.com.

Samples are available for all Foundation Armor products, and
Foundation Armor technicians are available prior to ordering to answer any
questions you may have. Please ensure you have tested the product before
ordering, and that you have verified suitability and coverage.

All sales are final for all pallet, drum, and tote orders,
as well as discounted, wholesale, and custom blend formulation orders.

Safety Data Sheets & Technical Data Sheets

Prior to purchasing, please visit FoundationArmor.com to view the current SDS and Technical Data Sheet.

High Solids Epoxy Colored Base

Colored Epoxy Coating Designed to Go Over the Armor MB100. It Acts as A Colored Base-Coat for the Armor Epoxy Floor Flakes.

Description

The ARMOR Epoxy100 product is 100% solids, two component, cyclo-aliphatic amine epoxy system. This product offers excellent durability including abrasion resistance, chemical resistance and hot tire resistance. This product is a low odor, user-friendly high-performance concrete flooring system.

Offers a smooth, gloss finish
Enhanced flow and leveling properties
High build
Great for use with vinyl chip, quartz, and metallic flooring applications
Available in clear, Black, Medium Gray, Light Gray, Sun Buff, White (color packs)

Looking for a complete viny flake coating system? We can help!

PRIMER: Armor MB100
COLOR: Armor 100% Epoxy (colored)
CHIPS: FULL BROADCAST Vinyl Flakes
TOP-COAT: Armor SCU85

Application Instructions

For complete application instructions, please refer to the Technical Data Sheet published on FoundationArmor.com.

Coverage

Coverage: Up to 250-400 ft2/3-gallon kit in one coat

Coverage rates will vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.

Uses

The Armor Epoxy 100 is designed for use on interior concrete floors.

It is also a great color base-coat if you are considering an epoxy flake system.

If you are using the Armor Epoxy Flake System, here is how to apply the complete coating system:

Primer Coat: Apply the ARMOR MB100 Primer-coat. Allow 8-24 hours to cure before applying the epoxy base color coat.
Color Base Coat: Apply ARMOR EPOXY100 color epoxy basecoat to floor.
Broadcast Vinyl Flakes: Immediately after applying the EPOXY100, wearing spike shoes, broadcast vinyl flakes at a rate of 14lbs – 18lbs per 100ft² or until the epoxy completely covered (until the base color coat is no longer visible). Allow the floor to cure for 10-14 hours.
Test Flakes: Test the floor to verify the chips are not moving and the epoxy is set up enough to prepare the floor for the urethane topcoat. Simply press your thumb down on the chips and slowly twist your thumb to verify the epoxy below and the chips are not moving.
Scrape and Clean Floor: Using a flat blade scraper, at a low angle, glide the scraper across the surface removing all vertically bonded flakes and all other residual unbonded vinyl flakes. After scraping the floor sweep and vacuum the floor to ensure only bonded vinyl flakes remain before applying the urethane topcoat.
Top Clear Coat: Apply a urethane topcoat (ARMOR SCU85, UTX60 Gloss) by pouring the material in ribbons and spread with a flexible magic squeegee, followed by back-rolling with a 3/8” nap roller. Do not allow the urethane topcoat to puddle and do not over-roll the surface as it is essential to ensure a uniform film formation over the surface. Visual indicators should be: light, uniform liquid appearance on the surface with no puddling Note: Make sure the roller is fully saturated before rolling.