Armor SX5000 WB

The Armor SX5000 WB is a professional-grade water-based silane siloxane concrete sealer for unsealed concrete, brick, pavers, bluestone, flagstone, slate, and other natural stone. It penetrates the substrate and chemically reacts to form a long-lasting water-repellent barrier below the surface that reduces the absorption of water and other liquids by up to 95%. The Armor SX5000 WB silane siloxane sealer helps to reduce damage caused by water absorption, snow and ice, and road salts.

• PROFESSIONAL GRADE SILANE SILOXANE SEALER: The Armor SX5000 WB is a professional-grade water-based silane siloxane sealer designed for use on unsealed concrete, brick, paver, bluestone, flagstone, slate, natural stone, and masonry.
• REDUCES WATER ABSROPTION BY UP TO 95%: The Armor SX5000 WB chemically reacts to form a water-repellent barrier below the surface that will reduce the absorption of water and other liquids by up to 95%.
• WON’T CHANGE THE LOOK OR COLOR: Formulated with high-quality US-manufactured resins, the Armor SX5000 WB is designed to protect your concrete, brick, pavers, stone, and masonry without changing the look, color, or feel. Your substrate will look and feel exactly as it did before it was sealed!
• LONG LASTING PROTECTION: The Armor SX5000 WB Silane-Siloxane concrete sealer chemically reacts to form a water-repellent barrier below the surface that can last for up to 7-10 years. By reducing the absorption of water through the surface, damage caused by water absorption is also reduced. Sealed surfaces are more resistant to cracking, spalling, ice damage, salt damage, organic surface growth, and staining.
• READY TO USE: The Armor SX5000 WB is ready-to-use and can be applied to a properly cleaned and prepped unsealed surface with pump sprayer. One gallon covers up to 175-225 square feet per gallon. Foundation Armor cleaners and sprayers are available separately.
• EASY TO MAINTAIN: The Armor SX5000 WB works entirely below the surface so there is no surface film or coating to maintain. When it is time to reseal, simply apply 1-2 coats of the Armor SX5000 WB to a clean, dry, and absorbent surface with a pump sprayer.
• WATER BASED FORMULA: The Armor SX5000 WB is water-based. It is easy to use, 0 VOC, and has no odor. Clean-up is quick and easy, and can be done with soap and water.

Surface Preparation:

The Armor SX5000 WB should be applied to a completely clean, dry, and absorbent surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor SX5000 WB to a test area to verify absorption, coverage, compatibility, and project suitability.

The Armor SX5000 WB is designed specifically for unsealed concrete and masonry surfaces. Do not apply this product over a surface recently sealed with a water repellent sealer, or previously sealed with a film-forming sealer or coating.

Application:

A commercial pump sprayer is recommended to achieve the best coverage and results. Be sure the psi is no greater than 20. Use a .3-.5 GPM adjustable cone tip.

Apply the first coat of Armor SX5000 WB, ensuring the entire surface is evenly saturated. Wait at least 10-15 minutes, then apply the second coat. Do not flood the surface or allow puddles to form, this will result in over application and the formation of dark spots on the surface. Less porous surfaces, such as bluestone, flagstone, and slate, may only require one coat.

Substrates sealed with Armor SX5000 WB may be coated with silicone emulsion paints and many oil based paints once the surface has had 72 hours to dry. Testing is always necessary and recommended to assure proper adhesion. Adhesion may be improved if the surface is pressure washed and allowed to dry prior to application. Armor SX5000 WB is not a paint primer. Adhesion of cementitious coatings, stucco, plaster, etc., may be adversely affected. These types of substrate treatments should be installed and allowed to fully cure before applying Armor SX5000 WB. Always test to verify compatibility.

Time of Day

The temperature of the air and surface must be 55-85 degrees F during application. If freezing conditions exist prior to application, it is highly recommended that the substrate be allowed to fully thaw. Should this recommendation not be followed, the product may not yield adequate protective properties.

Once applied, the surface should be kept dry for at least 24 hours.

Clean-Up

Use warm water and soap. Dispose of containers in accordance with local and federal regulations.

Product Removal

Armor SX5000 WB penetrates deep into to the surface. Removal is not recommended.

For in-depth up-to-date application instructions, please refer to the Technical Data Sheet and Safety Data Sheet for this product. Documents, videos, and customer photos can be found HERE.

Porous Surfaces: Up to 175 square feet per gallon in one coat.
Smooth Surfaces (once properly prepped): Up to 200-225 square feet per gallon in one coat.

Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.

The Armor SX5000 WB is designed specifically to be used on unsealed concrete, brick, natural stone, and masonry. The Armor SX5000 WB can’t be applied over any existing sealers, paints, or coatings.

The Armor SX5000 WB is a fantastic sealer for a variety of applications, including:

• Brick chimneys and brick walls
• Concrete, brick, natural stone, and paver patios and walkways
• Concrete, brick, and paver driveways
• Retaining walls and landscape curbing
• Concrete, brick, and stone building faces and accents
• Garage, basement, and warehouse floors
• Much more!