PRO-Grade Sealers & Coatings for Concrete, Brick, Pavers, Stone, and Masonry

SKU: UTN603GAL-1  |  Barcode: 856994005084

Armor UTN60

Regular price $324.99
Shipping calculated at checkout.

Color: Clear

SHIPS FREE* same-day when order is placed before 3 PM EST M-F. Orders placed after 3 PM, on a weekend, or on a holiday will ship the following business day. *For shipping to Hawaii, Alaska, or outside of the US please reach out for a shipping quote.

Choosing a VOC

VOC regulations vary by state. Please use the following VOC guidelines to help choose the appropriate formulation for your project. If you have any questions, please don’t hesitate to contact a Foundation Armor technician.

<250 VOC: The <250 VOC formulation can be used in every state except CA, CT, DE, MD, MI,  NY, OH, UT. If you live in a restricted state, please consider the Armor UTX60 – Gloss or Armor UTX60 – Matte.

Please note that the above information is for informational purposes only, and based solely on information known to Foundation Armor at the time this page’s publication. VOC regulations can change, and can vary by county within each state. Please consult your federal, state, and local regulations to ensure you are using a VOC compliant product.

Returns

Returns are accepted on unopened and unused complete product kits within 30 days from the date the product was received. Returns are not accepted on partial kits, or parts of kits. If you need to make a return, please contact us for a pre-paid return label. We can be reached at 866-306-0246, or via email at returns@foundationarmor.com.

All sales are final for pallet, drum, and tote orders, as well as discounted, wholesale, and custom blend formulation orders.



Professional Grade

Solvent-Based High Gloss Urethane Coating for Interior Concrete floors

Description

The Armor UTN60 is a 60% solids solvent based high gloss aliphatic urethane coating designed to offer superior protection against damage and deterioration caused by surface abrasion and surface spills.

  • Offers superior resistance to oil, gas, and most chemicals
  • Offers superior resistance against high foot traffic and vehicle traffic
  • Stops concrete dusting, and reduces deterioration caused by surface abrasion
  • The durable high gloss finish can last for up to 10 years
  • Available in clear, and a variety of color options
  • Perfect top coat for the Armor Epoxy

Application Instructions

Surface Preparation

Surface preparation is key to the success and life of the UTN60. UTN60 must be applied to fully cured unsealed interior concrete that has been properly prepped with a diamond grinder to a 25-80 grit finish (concrete surface profile 3).  Surface needs to be completely dry and free of oil, dirt, grime, wax, detergent or any incompatible paint or coating.

If applying the Armor UTN60 as a top coat over the Armor Epoxy Primer, UTN60 must be applied within the recoat window of the Armor Epoxy. If applying the UTN60 to an existing coating, it is important to first speak with a Foundation Armor Technician regarding compatibility, required surface preparation and application.

Product Mixing

Clear UTN60: Slow drill mix 2 Parts A with 1 Part B in a clean 5 gallon pail. Mix for 60-90 seconds, or until material is thoroughly blended and homogenous. Avoid whipping air into the coating. Improper mixing can result in coating failure.

UTN60 w/Color Pack: Before adding in Part B, slow drill mix color into pre-mixed Part A for roughly 30 seconds. 4.5-6 oz. of color should be added to each gallon of material. For example, if you are mixing a 3 gallon UTN60 kit, you would mix in a total of 13.5-18 oz of color. Once the color has been mixed into Part A, add in Part B and slow drill mix for 60-90 seconds, or until material is thoroughly blended and homogenous. When applying the UTN60 in a color, you may see small areas of concrete through the first coat of material. Applying a second color coat will help to achieve a consistent opaque surface finish.

Non-Slip Additive: For added surface traction, the Armor Non-Slip additive can be added. The ultra-fine, fine, and coarse Armor Non-Slip additives works best in the Armor UTX60.  Applying the Ultra-Fine: Slowly drill mix 3-6.5 ounces of non-slip additive per gallon, until completely blended, then apply. For Fine and Coarse: When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive.

DuraTrac Additive: Slowly drill mix the DuraTrac additive into the fully mixed, ready to apply UTN60. If applying in color, ensure the color has been mixed in as well. While 5 ounces of DuraTrac per gallon of UTN60 is suggested, you can add up to 32 ounces of DuraTrac for every 1 gallon of UTN60. Please note, the more DuraTrac you add, the more cautious you need to be to avoid clumping. If clumping occurs, too much DuraTrac has been added. DuraTrac can also slightly reduce the gloss level. Testing in a small area is strongly suggested in order to determine the appropriate amount of DuraTrac necessary for your application.

Please note, do not apply both the Armor Non-Slip Additive and the DuraTrac Additive. Only one should be applied per application.

Product Application

Apply the mixed material using a 3/8” shed-less nap roller. It is important to apply within estimated pot life and recommended temperature guidelines. Please note that pot life may vary.  If the material becomes thick while applying, or starts sticking to the roller , stop applying and discard the mixed material. At this point it has reached the end of the usable pot life. While applying keep a wet edge to prevent roller marks. It is recommended to work in sections usually using control joints as dividers to ensure proper application results. Do not allow to Puddle! If recoating after 24 hours you must wait 5-7 days to allow the coating to cure. Once 5-7 days has passed, a light sanding using an 80 grit screen pad (and a thorough surface cleaning) is required prior to applying an additional coat to ensure adequate coat adhesion.

Blending roller lines: When rolling the UTN60 it is considered a best practice to lift the roller at the end of the stroke so there are no roller lines/stop lines. Applying the UTN60 is very similar to applying paint, be sure to always maintain a wet edge. Work fast, but controlled, you only have about 25-30 minutes of working time before the pot life is reached.

Applying UTN60 outside of the suggested parameters may result in application failure. It is always recommended to test the product in a small, inconspicuous area (on the same concrete substrate) for desired results prior to application. Coverage rates may vary for all coatings and substrates depending on porosity, density, texture etc.

The applicator is responsible for suitability of application, and the results of the application. We suggest applying to a test area first to verify compatibility, absorption, coverage rate, and project suitability.

Clean-Up

Use MEK. Dispose of containers in accordance with local and federal regulations.

Product-Removal

Dried, cured sealer may be removed with the Armor CR100, or by using a diamond grinding method, sandblasting method or similar mechanical action.

For in-depth up-to-date application instructions, please refer to the Technical Data Sheet and Safety Data Sheet for this product. Documents, videos, and customer photos can be found HERE.

Coverage

First Coat: Up to 750-900 ft2 /3 gallon kit

Second Coat: Up to 800-1000 ft2 /3 gallon kit

Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Excessive build up should be avoided.

Uses

The Armor UTN60 is a great choice for a variety of interior concrete applications, including:

  • Garage floors
  • Basement floors
  • Warehouse floors
  • Shop floors
  • Machine shop floors
  • Manufacturing facility floors
  • Retail floors

The Armor UTN60 is designed specifically for unsealed interior concrete floors. Prior to application, the floor must be properly prepped and clean so that the sealer can absorb, bond, and cure.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Venmo
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Thousands of Happy Customers

Customer Reviews

Based on 33 reviews
100%
(33)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Anonymous
very durable product that holds up to its claims

I first bought this 3 years ago for a detached garage floor and recently for my attached garage. It has held up beautifully against lacquer thinner brake fluid gas etc. It holds up as advertised.

A
Anonymous
Great product but not for beginners

The headlines say it all. It works. But you need to know how to work this product or it will get away from you really quick. Call a flooring applicator and hire him after hours.

A
Anonymous
A great gloss sealer!

We just finished doing an epoxy flooring for our garage. This product went on so smooth and the finish is beautiful. We are so please with not only the product but the outcome of our project because of the high quality gloss! 10/10 would highly recommend

A
Anonymous
Great value and service

Great product and great customer service. Sean was very helpful when I was researching which product to buy and Eric was very helpful with the application. My garage floor looks great and I could not have made a better product selection!

A
Anonymous
Great Product Fast Shipping Great Customer Service

I can't say enough good things about this company or their products. I used the SX5000 to seal my driveway and the UTN 60 on my garage floor. The products shipped fast the technicians were very helpful and the sales representatives were on top of their game. Very happy with the finished products and how both products have performed. I will never use anything other than Foundation Armor products again. There is a very clear difference in quality!